This is an old revision of the document!

Wireless Interface Mode Table

	WDS Mode	Wireless Client Mode	Client Bridge	Repeater	Repeater Bridge	Two routers (1 Client Mode, 1 AP Mode)
Requires admin access for all routers. Routers WDS implementations must be compatible.	•
Does not require control over host access point/routers; can connect to a host you don't control		•	•	•	•	•
Supports multiple wired client devices	•	•	• *	•	• *	•
Supports multiple wireless client devices	•			•	• *	•
Bandwidth is halved for wireless clients	•	n/a	n/a	•	•	Not if you use two channels
All routers and clients share the same subnet	in LAN mode		•		•
Each router is on its own subnet with its client devices	in P2P mode	•		•		•
Creates a true transparent bridge compatible with all protocols	•
Uses MAC address translation (MAT) (proxy ARP) (not compatible with some applications and protocols that depend on MAC addresses) (potential ARP problems) *			• *		• *
Allows different SSID on repeated network	depends on encryption choice	n/a	n/a	•	•	•
Encryption support	WEP, WPA2 (caveats)	any	any	any	any	any
Can repeat signal from a wireless ISP				•	•	•
Can repeat a weak wireless signal in a hotel		•		•	•	•

FreshTomato Wiki