Differences

This shows you the differences between two versions of the page.

--- vpn-wireguard [2025/11/14 16:19] – [General Troubleshooting] hogwild
+++ vpn-wireguard [2025/11/19 20:30] (current) – [Problem: Traffic flowing in one Direction] -Change to: " hogwild
@@ Line 485: / Line 485: @@
  \\
-==== Problem: Traffic only flows in one Direction ====
-Sometimes, it may occur that from one end of your setup ("A)", you can ping devices and both VPN virtual interfaces,at the other end ("B"), however, you cannot ping the remote ("A") router or devices or the client VPN virtual interface, from end A. It this occurs, check that there are default routes setup from A to B. Also, please ke sure on the client side, you have "Inbound firewall" Unchecked.
+==== Problem: Traffic flowing in only one Direction ====
-On the server side, make sure to add the client's subnet so it knows how to route traffic from the server back to the client.
+ \\
+Sometimes, it may occur that from one end of your setup ("A)", you can ping devices and both VPN virtual interfaces at the other end ("B"), however, from end B, you cannot ping the remote router or devices or the client VPN virtual interface at end A.
+It this occurs, please check that there are default routes setup from B to A. Also, please check that on the client side, (in this case, end B), the "Inbound firewall" option is disabled. On the server side, make sure to add the client's subnet, so it knows how to route traffic from the server back to the client.

FreshTomato Wiki