Differences

This shows you the differences between two versions of the page.

--- vpn-wireguard [2025/11/14 16:17] – [General Troubleshooting] -Add Troubleshooting tip about how to fix one-way traffic hogwild
+++ vpn-wireguard [2025/11/19 20:30] (current) – [Problem: Traffic flowing in one Direction] -Change to: " hogwild
@@ Line 484: / Line 484: @@
  \\
+==== Problem: Traffic flowing in only one Direction ====
  \\
-Problem: Traffic is only flowing in one Direction
-Sometimes, it may occur that from one end of your setup ("A)", you can ping devices and both VPN virtual interfaces, at the other end ("B"), however, you cannot ping the remote ("A") router or devices or the client VPN virtual interface,
-check that there are default routes setup at that end towards the other end. Make sure on the client side, you have "Inbound firewall" Unchecked.
-On the server side, make sure to add the client's subnet so it knows how to route traffic from the server back to the client.
+Sometimes, it may occur that from one end of your setup ("A)", you can ping devices and both VPN virtual interfaces at the other end ("B"), however, from end B, you cannot ping the remote router or devices or the client VPN virtual interface at end A.
+It this occurs, please check that there are default routes setup from B to A. Also, please check that on the client side, (in this case, end B), the "Inbound firewall" option is disabled. On the server side, make sure to add the client's subnet, so it knows how to route traffic from the server back to the client.

FreshTomato Wiki