Differences

This shows you the differences between two versions of the page.

--- vpn-wireguard [2025/11/12 20:11] – [Interface] -Spelling, condense hogwild
+++ vpn-wireguard [2025/11/19 20:30] (current) – [Problem: Traffic flowing in one Direction] -Change to: " hogwild
@@ Line 481: / Line 481: @@
     * Remote LAN IP
- \\  The point of failure you find will provide critical insight into the type of issue you are facing.
+ \\  The point of failure you find will guide you in understanding what type of issue you are facing.
  \\
+==== Problem: Traffic flowing in only one Direction ====
  \\
+Sometimes, it may occur that from one end of your setup ("A)", you can ping devices and both VPN virtual interfaces at the other end ("B"), however, from end B, you cannot ping the remote router or devices or the client VPN virtual interface at end A.
+It this occurs, please check that there are default routes setup from B to A. Also, please check that on the client side, (in this case, end B), the "Inbound firewall" option is disabled. On the server side, make sure to add the client's subnet, so it knows how to route traffic from the server back to the client.

FreshTomato Wiki