Differences

This shows you the differences between two versions of the page.

--- vpn-wireguard [2025/08/13 21:33] – [Introduction] Specify linked page more appropriate when building site-to-site hub and spoke or similar hogwild
+++ vpn-wireguard [2025/08/13 22:38] (current) – [Interface] -punctuation hogwild
@@ Line 5: / Line 5: @@
 WireGuard can be configured/run via the web interface, or at the command line. Either interface lets you configure Wireguard settings and generate configuration scripts. This page describes how to configure Wireguard through the web interface.
-To configure WireGuard //manually//, and for some basic theory, see the HOWTO: [[wireguard_on_freshtomato|Set up WireGuard]] . That page is more appropriate when an external VPN provider is not involved and you're building a site-to-site mesh, hub and spoke or similar VPN.
+To configure WireGuard //manually//, and for some basic theory, see the HOWTO: [[wireguard_on_freshtomato|Set up WireGuard]] . That page is more appropriate when you're not using an external VPN provider. It is more intended to discuss the configuration VPNs with a hub-and-spoke or mesh topology.
 Unless using an external VPN provider, it's best to "nominate" a main router that will produce configurations. Clients, such as other FreshTomato routers and other devices, must import the configuration generated by this main router. Relevant configuration changes may require you to delete and reimport the configuration on those client devices.
@@ Line 173: / Line 173: @@
 **Routing Mode -** Here, select the mode to used on the WireGuard interface.
- \\
+This option appears only when one of the Internal hub-and-spoke or mesh VPN types is selected.\\
   * Off - FreshTomato won't add any routing rules for the the\\ WireGuard interface.\\
   * Auto - choosing this means the WireGuard interface will be routed \\ using the default table (the same number as the interface port)\\
-  * Custom Table  -  this option will route the WireGuard interface \\ using a custom table number. If you choose this option, you must \\ include the \\ table number in the additional field.
+  * Custom Table  -  this option will route the WireGuard interface \\ using a custom table number. If you choose this option, you must \\ include the table number in the additional field.
  \\
@@ Line 198: / Line 198: @@
   * Hub and Spoke - All peers can only communicate via the Hub.
   * Full Mesh (defined Endpoint only) - FreshTomato will try to create \\ a full mesh among peers with EndPoint defined.
-  * Full Mesh: FreshTomato will try to establish a full mesh \\ between all peers.
+  * Full Mesh - FreshTomato will try to establish a full mesh \\ between all peers.
   * External VPN Provider - FreshTomato will try to establish \\ a VPN connection with an external VPN provider.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools