FreshTomato Wiki

User Tools

Site Tools

Trace: • 2fa
vpn-wireguard

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
vpn-wireguard [2025/08/13 21:19] – [Interface] hogwildvpn-wireguard [2025/08/13 22:38] (current) – [Interface] -punctuation hogwild
Line 5: Line 5:
 WireGuard can be configured/run via the web interface, or at the command line. Either interface lets you configure Wireguard settings and generate configuration scripts. This page describes how to configure Wireguard through the web interface. WireGuard can be configured/run via the web interface, or at the command line. Either interface lets you configure Wireguard settings and generate configuration scripts. This page describes how to configure Wireguard through the web interface.
  
-To configure WireGuard //manually//, and for some basic theory, see the HOWTO: [[wireguard_on_freshtomato|Set up WireGuard]] . That page is appropriate when an external VPN provider is not involved.+To configure WireGuard //manually//, and for some basic theory, see the HOWTO: [[wireguard_on_freshtomato|Set up WireGuard]] . That page is more appropriate when you're not using an external VPN provider. It is more intended to discuss the configuration VPNs with a hub-and-spoke or mesh topology.
  
 Unless using an external VPN provider, it's best to "nominate" a main router that will produce configurations. Clients, such as other FreshTomato routers and other devices, must import the configuration generated by this main router. Relevant configuration changes may require you to delete and reimport the configuration on those client devices. Unless using an external VPN provider, it's best to "nominate" a main router that will produce configurations. Clients, such as other FreshTomato routers and other devices, must import the configuration generated by this main router. Relevant configuration changes may require you to delete and reimport the configuration on those client devices.
Line 47: Line 47:
  \\ \\  \\ \\
  
-{{::vpn-wireguard-down-2025.3.png?73}}    indicates the Wireguard service isn't running and no VPN tunnel is currently established on this interface.  \\  \\+{{::vpn-wireguard-down-2025.3.png?73}}    indicates the Wireguard service isn't running and no VPN tunnel currently exists on this interface.  \\  \\ 
  
 {{::vpn-wireguard-start_now-2025.3.png?80}}   clicking this starts the WireGuard service, and makes the interface negotiate a VPN tunnel to peers. {{::vpn-wireguard-start_now-2025.3.png?80}}   clicking this starts the WireGuard service, and makes the interface negotiate a VPN tunnel to peers.
  
-This may take time, especially on slower routers.+ \\ {{::vpn-wireguard-up-2025.3.png?76}}    indicates the selected WireGuard connection is running, and connected to the configured peers.
  
- \\ \\ {{::vpn-wireguard-up-2025.3.png?76}}    indicates the selected WireGuard connection is running, and connected to the configured peers. + \\ 
- +
- \\+
  
 {{::vpn-wireguard-stop_now-2025.3.png?81}}   terminates the current WireGuard VPN tunnel and stops the service. {{::vpn-wireguard-stop_now-2025.3.png?81}}   terminates the current WireGuard VPN tunnel and stops the service.
Line 107: Line 105:
  
 If a path/file is specified here, all other settings in the web interface will be ignored.\\ If a path/file is specified here, all other settings in the web interface will be ignored.\\
 +
 + \\
  
 **Port** - the UDP the port on which the interface’s tunnel will be built with the remote endpoints. **Port** - the UDP the port on which the interface’s tunnel will be built with the remote endpoints.
Line 171: Line 171:
  \\  \\
  
-**Routing Mode -** Here, select the mode+**Routing Mode -** Here, select the mode to used on the WireGuard interface. 
 + 
 +This option appears only when one of the Internal hub-and-spoke or mesh VPN types is selected.\\ 
 + 
 +  * Off - FreshTomato won't add any routing rules for the the\\ WireGuard interface.\\  
 +  * Auto - choosing this means the WireGuard interface will be routed \\ using the default table (the same number as the interface port)\\  
 +  * Custom Table  -  this option will route the WireGuard interface \\ using a custom table number. If you choose this option, you must \\ include the table number in the additional field.
  
  \\  \\
  
-  * Off\\  + \\
-  * Auto\\  +
-  * Custom Table \\+
  
 **Firewall** - lets you choose the appropriate firewall setting for your WireGuard setup. **Firewall** - lets you choose the appropriate firewall setting for your WireGuard setup.
Line 194: Line 198:
   * Hub and Spoke - All peers can only communicate via the Hub.   * Hub and Spoke - All peers can only communicate via the Hub.
   * Full Mesh (defined Endpoint only) - FreshTomato will try to create \\ a full mesh among peers with EndPoint defined.   * Full Mesh (defined Endpoint only) - FreshTomato will try to create \\ a full mesh among peers with EndPoint defined.
-  * Full Mesh: FreshTomato will try to establish a full mesh \\ between all peers.+  * Full Mesh - FreshTomato will try to establish a full mesh \\ between all peers.
   * External VPN Provider - FreshTomato will try to establish \\ a VPN connection with an external VPN provider.   * External VPN Provider - FreshTomato will try to establish \\ a VPN connection with an external VPN provider.
  
Line 207: Line 211:
  \\  \\
  
-  * Off - FreshTomato will not add any routing rules for the \\  WireGuard interface. Only existing routing rules will be applied to traffic. \\ +  * \\ 
   * All \\    * All \\ 
   * Routing Policy \\    * Routing Policy \\ 
vpn-wireguard.1755116355.txt.gz · Last modified: by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki