Site Tools


nas-bittorrent

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
nas-bittorrent [2025/10/27 22:51] – [BitTorrent client (Transmission)] hogwildnas-bittorrent [2025/10/28 01:03] (current) – [BitTorrent client (Transmission)] hogwild
Line 1: Line 1:
 ====== BitTorrent client (Transmission) ====== ====== BitTorrent client (Transmission) ======
  
-Transmission is an open source BitTorrent client. It lets you download/upload torrents directly on your router. The results is that you don't have to leave a LAN device, such as a PC running just to share Torrents. However, you will need storage, either attached to your router via USB, or elsewhere, via one of the filesharing protocols, such as CIFS.\\+Transmission is an open source BitTorrent client. With is, you can download/upload torrents directly on your router. The result is that you won't have to leave a LAN device running, such as a PCjust to share Torrents. In order to share large files, you'll need some form of external storage, such as an external [[nas-usb|USB drive]] or a [[admin-cifs|CIFS]] share.
  
-If transmission is crashing you may need to add 3 packages as using the following: +If Transmission is crashingyou may need to add 3 packages to your setup. To resolve this, install the three packages listed below using the opkg tool, as follows:
- +
-''opkg install transmission-web transmission-daemon transmission-remote'' \\ +
- +
-Simply download the three packages using the opkg tool, then point to the "/opt/bin" directory from the Transmission web client. That will use opkg's version of Transmission:\\ opkg install transmission-web transmission-daemon transmission-remote\\ \\ Anecdotal reports suggest that should prevent further crashes.+
  
  \\  \\
  
-To share large files, you'll need some form of external storage, such as an external [[nas-usb|USB drive]] or a [[admin-cifs|CIFS]] share. +''opkg install transmission-web transmission-daemon transmission-remote'' \\  \\
- +
- \\+
  
-{{:pasted:20220222-124628.png}}  \\  \\+Then, configure a custom path in the //Transmission binary path// (seen below) with the "/opt/bin" directory where the Transmission web client is found. That will cause the Transmission binary installed via opkg to be used instead of FreshTomato's default one. Anecdotal reports suggest this should prevent further crashing.  \\   \\   \\   \\  {{:pasted:20220222-124628.png}}  \\  \\
  
 **Enable:** checking this and Save immediately runs Transmission and starts it at each boot. \\  \\ **Enable:** checking this and Save immediately runs Transmission and starts it at each boot. \\  \\
Line 94: Line 88:
  \\  \\
  
-**Upload queuing:** specifies how many active uploads can run simultaneously.\\+**Upload queuing:** specifies how many active uploads can run simultaneously.\\  \\ 
  
 ===== Advanced Settings ===== ===== Advanced Settings =====
nas-bittorrent.1761605483.txt.gz · Last modified: by hogwild