Differences

This shows you the differences between two versions of the page.

--- hardware_compatibility [2025/08/13 04:59] – -Add 2 rows for EX6200 and EX7000 (proper locations) hogwild
+++ hardware_compatibility [2025/08/16 18:35] (current) – rs232
@@ Line 4: / Line 4: @@
   - Look for your device in the [[hardware_compatibility#hardware_compatibility_table|Hardware Compatibility Table]] below. \\ It's the authoritative source for hardware support. Note your //hardware revision. //[(hardrev)] \\ It too must be included there. If your device is in the table, it's\\ officially supported. Review any notes in the table. There are \\ important details recorded there. \\ \\
-  - Only devices with **Broadcom (ARM or MIPS architecture) chipsets** are supported. \\ \\ Use a reliable source to confirm your device uses them, such as  \\ a database like [(refdbs)]  [[https://wikidevi.wi-cat.ru/|WikiDevi]] or [[https://techinfodepot.shoutwiki.com/|TechInfoDepot]]. \\ There, search for your model. If it's in the search results, confirm that \\ "Broadcom" is listed in all required fields below.  \\ \\ - CPU1 \\ - Switch \\ - All fields whose names conform to these formats: [(chipids)] \\ ETH chip''<ff serif>//X''//</ff> WI''<ff serif>//X''//</ff> chip''<ff serif>//X''//</ff>
+  - Only devices with **Broadcom (ARM or MIPS architecture) chipsets** are supported. \\ \\ Use a reliable source to confirm your device uses them, such as  \\ a database like [(refdbs)]  [[https://wikidevi.wi-cat.ru/|WikiDevi]] or [[https://techinfodepot.shoutwiki.com/|TechInfoDepot]]. \\ There, search for your model. If it's in the search results, confirm that \\ "Broadcom" is listed in all required fields below.  \\ \\ - CPU1 \\ - Switch \\ - All fields whose names conform to these formats: [(chipids)] \\ ETH chip''<ff serif>''//X//''</ff>'' WI''<ff serif>''//X//''</ff>'' chip''<ff serif>''//X//''</ff>''
 \\ After confirming this, you can post a request on the forum to add support for it. \\ In your post, include links to the database references you checked.\\ \\
@@ Line 11: / Line 11: @@
 [(hardrev>Sometimes one hardware version/revision of the same model is supported, but others aren't. For example, the "A1" version is supported, but "B2" isn't. Often, this is because different revisions of the same model contain different chipsets. FreshTomato only supports devices using **Broadcom chipsets of ARM or MIPS architecture**. \\ \\ )] [(refdbs>These sites also maintain lists of devices compatible with FreshTomato (lists of Tomato-supported devices at [[https://wikidevi.wi-cat.ru/List_of_Tomato_firmware_supported_devices|WikiDevi]] and [[https://techinfodepot.shoutwiki.com/wiki/List_of_Tomato_firmware_supported_devices|TechInfoDepot]]). However, their information is sourced here and merely reconstructed in their databases. Thus, contradictions between their data and data on this page indicate the presence of incomplete or incorrect information elsewhere, not here. \\ \\ )] [(chipids>Where <ff serif>//X//</ff> is a digit indicating a series ordinal such as first or second. For any given device, the first wireless chip on a given band would be labelled "WI**1** chip**1**". Another chip on that same band would be "WI**1** chip**2**". A chip on a different band would be labelled "WI**2** chip**1**". For an example, visit the [[https://wikidevi.wi-cat.ru/ASUS_RT-AC3100|Asus RT-AC3100]] entry on WikiDevi. \\ \\ )] [(wipbuilds>If the effort is successful and has enough testers, this will usually result in the device being added to the compatibility table. The FreshTomato developers welcome the upstreaming of such work.)]
 ==== Notes ====
@@ Line 107: / Line 108: @@
 | Linksys \\ **WRT610N**  |  v2  |  MIPS R2  |  480Mhz ×1  |  1GbE ×4  |  1 / ‒  |  N300  |  8MB  |  32KB  |  64MB  |  K26 (SDK5.10)  |   |
 | Netgear \\ **AC1450**  |   |  ARM  |  800Mhz ×2  |  1GbE ×4  |  ‒ / 1  |  AC1750  |  128MB  |  64KB  |  256MB  |  K26ARM (SDK6.37)  | Supported from 2022.3. ([[https://www.linksysinfo.org/index.php?threads/netgear-ac1450.77269/|forum thread]])  |
-|  |  |  |  |  |  |  |  |  |  |  |  |
+| Netgear \\ **EX6200**  |   |  ARM  |  800Mhz ×2  |  1GbE ×4  |  ‒ / 1  |  AC1750  |  8MB  |  64KB  |  128MB  |  K26ARM (SDK6.37)  | Supported from 2025.3 (NO USB support!) |
-|  |  |  |  |  |  |  |  |  |  |  |  |
+| Netgear \\ **EX7000**  |   |  ARM  |  800Mhz ×2  |  1GbE ×4  |  ‒ / 1  |  AC1900  |  16MB  |  64KB  |  128MB  |  K26ARM (SDK6.37)  | Ethernet works fully starting with r2025.3.  \\ (Workaround for release r2025.2 and older: see[[https://www.linksysinfo.org/index.php?threads/add-support-for-netgear-ex7000.78502/|forum thread]]) |
 | Netgear \\ **R6200**  |  v2  |  ARM  |  800Mhz ×1  |  1GbE ×4  |  ‒ / 1  |  AC1200  |  128MB  |  64KB  |  256MB  |  K26ARM (SDK6.37)  | Supported from 2023.5. ([[https://www.linksysinfo.org/index.php?threads/added-support-coming-soon-for-the-netgear-r6200v2-router.78246/|forum thread]])  |
 | Netgear \\ **R6250**  |   |  ARM  |  800Mhz ×2  |  1GbE ×4  |  ‒ / 1  |  AC1600  |  128MB  |  64KB  |  256MB  |  K26ARM (SDK6.37)  |   |
@@ Line 119: / Line 120: @@
 | Netgear \\ **R6900**  |  v1  |  ARM  |  1Ghz ×2  |  1GbE ×4  |  ‒ / 1  |  AC1900  |  128MB  |  64KB  |  256MB  |  K26ARM (SDK6.37)  | Supported from r2021.3 \\ \\ **Don't enable JFFS with FreshTomato prior to 2022.1; doing so deletes** board_data **partition!**  |
 | Netgear \\ **R7000**  |   |  ARM  |  1Ghz ×2  |  1GbE ×4  |  1 / 1  |  AC1900  |  128MB  |  64KB  |  256MB  |  K26ARM (SDK6.37)  | **Don't enable JFFS with FreshTomato prior to 2022.1; doing so deletes** board_data **partition!** \\ \\ If using a custom CFE/bootloader (e.g. Vortex 1.3.0.7), reinstall original Netgear CFE before flashing FreshTomato 2020.3 or newer.  |
-| Netgear \\ **EX6200**  |   |  ARM  |  800Mhz ×2  |  1GbE ×4  |  ‒ / 1  |  AC1750  |  8MB  |  64KB  |  128MB  |  K26ARM (SDK6.37)  | Supported from 2025.3 (NO USB support!) |
-| Netgear \\ **EX7000**  |   |  ARM  |  800Mhz ×2  |  1GbE ×4  |  ‒ / 1  |  AC1900  |  16MB  |  64KB  |  128MB  |  K26ARM (SDK6.37)  | Ethernet works fully starting with r2025.3.  \\ (Workaround for release r2025.2 and older: see[[https://www.linksysinfo.org/index.php?threads/add-support-for-netgear-ex7000.78502/|forum thread]]) |
 | Netgear \\ **R7900**  |   |  ARM  |  1Ghz ×2  |  1GbE ×4  |  ‒ / 1  |  AC3000  |  128MB  |  64KB  |  256MB  |  K26ARM7 (SDK7)  | Supported from r2022.4. \\  \\ This model has 256MB of RAM, contrary to Netgear's documentation.  |
 | Netgear \\ **R8000**  |   |  ARM  |  1Ghz ×2  |  1GbE ×4  |  1 / 1  |  AC3200  |  128MB  |  64KB  |  256MB  |  K26ARM7 (SDK7)  | **Don't enable JFFS with FreshTomato earlier than r2022.3;  doing so deletes** board_data **partition!**  |

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools