FreshTomato Wiki

User Tools

Site Tools

Trace: • admin-config • admin-iptraffic • splashd • jffs • wireguard_on_freshtomato • donations • admin-sched • mac_address • forward-upnp • retain_dhcp_lease_info_after_a_reboot
freshtomato_zerotier

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
freshtomato_zerotier [2023/04/21 18:33] – rs232freshtomato_zerotier [2025/08/23 00:06] (current) – hogwild
Line 1: Line 1:
 ====== Connecting FreshTomato to Zerotier ====== ====== Connecting FreshTomato to Zerotier ======
  
-ZeroTier lets you build modern, secure multi-point virtualized networks of almost any type. From robust peer-to-peer networking to multi-cloud mesh infrastructure, we enable global connectivity with the simplicity of a local network.+ZeroTier lets you build modern, secure, multi-point virtualized networks of almost any type. From robust peer-to-peer networking to multi-cloud mesh infrastructure, you can achieve global connectivity as easily as setting up a local LAN.
  
 + \\
  
-  * 1. Register an account on the [[https://www.zerotier.com/|Zerotier]] official website; +  - Register an account on the Zerotier website. [[https://www.zerotier.com/|Zerotier]] \\ \\   
-  * 2. Create a network on [[https://my.zerotier.com/|ZeroTier Central]], note down the network ID; +  - Create a network on [[https://my.zerotier.com/|ZeroTier Central]] \\ \\  
-  * 3. Use [[entware_installation_usage|Entware]] install zerotier (opkg install zerotier) on your router, if the router is mipsel based, the version of zerotier may very old(1.1.4？), and can not use some functions like ` join orbit`. You can download the newest version from: [[https://github.com/rampageX/arm-static-bins/raw/master/ZeroTierOne/1.10.6/mipsel/zerotier-one|ZeroTierOne 1.10.6 mipsel static-bin]], and replace the old one. +  - Note down the network ID. \\ \\  
-  * 4. Use this script to control zerotier (auto start zerotierone daemon and join the network, stop and unload tun etc..), remember replace your own NETWORK_ID in the script:+  - Use [[entware_installation_usage|Entware]] to install Zerotier on your router. \\ (At the command line, type "opkg install zerotier"). \\ \\  
 +  - If your router is MIPS-based, the Zerotier version may be \\ very old (~ 1.1.4). If so, it can't use some functions such as 'join orbit'. \\ Download the newest version  [[https://github.com/rampageX/arm-static-bins/raw/master/ZeroTierOne/1.10.6/mipsel/zerotier-one|ZeroTierOne 1.10.6 mipsel static-bin]] \\ and use it to replace the old version. \\ \\  
 +  - Use the script below to control Zerotier operation.\\ You can auto-start the daemon, join the network, stop, \\ unload tun and more. \\ \\  
 +  - (Replace the NETWORK_ID in this script with your own). 
 + 
 + \\  \\
  
 <code bash> <code bash>
Line 97: Line 103:
 </code> </code>
  
-  * 5. When zerotier run and join network success, go ZeroTier Central authorized the new device(this router), all done. + \\ 
-  * 6. Check the [[https://zerotier.atlassian.net/wiki/spaces/SD/overview?homepageId=163911|ZeroTier Knowledge Base]] for more info about zerotier.+ 
 + \\ 
 + 
 +When zerotier runs and has finished joining the network, go to ZeroTier Central and authorize the new (router) device. This completes the setup process. 
 + 
 +Check the [[https://zerotier.atlassian.net/wiki/spaces/SD/overview?homepageId=163911|ZeroTier Knowledge Base]] for more info about Zerotier. 
 + 
 + \\ 
 + 
 + \\ 
 + 
freshtomato_zerotier.1682098421.txt.gz · Last modified: by rs232

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki