Differences

This shows you the differences between two versions of the page.

--- faq [2025/05/11 17:15] – [How do I Get a 3G/4G/5G USB modem to work?] hogwild
+++ faq [2025/05/11 17:18] (current) – [Log Location Default] -remove "obviously" hogwild
@@ Line 137: / Line 137: @@
 Unless some type of permanent storage is configured, "/var/log/messages" is stored in RAM. As a result, it will not survive a router reboot.((
-If you enabled **Log To Remote System** your logs are obviously retained on the remote server as well.
+If you enabled **Log To Remote System** your logs are retained on the remote server as well.
 ))
@@ Line 202: / Line 202: @@
 FreshTomato has functions to automate the process of installing/configuring 3G/4G/5G connected USB modems. However, those functions are limited. One limitation is that generally, the FreshTomato build on your router must contain the the Plug and Play VendorID (VID) and DeviceID (PID) of your modem. If it's not included, the modem may not be detected or configured correctly.
-First, check the [[dongle_compatibility|3G/4G/5G compatibility]] page to see if FreshTomato supports your modem. When possible, that page will list the modem's Vendor ID and Device ID(s).
+First, check the [[dongle_compatibility|3G/4G/5G compatibility]] page to see if your modem is supported. When possible, that page will list the modem's Vendor ID and Device ID(s).
 Next, in FreshTomato's [[nas-usb|USB Support]] menu, verify that USB support is enabled. Then, enable the //3G/4G USB modem support// option in that same menu.

FreshTomato Wiki