Differences

This shows you the differences between two versions of the page.

--- basic-network [2025/10/16 18:59] – [WAN(x) Settings] -formatting hogwild
+++ basic-network [2026/01/20 07:54] (current) – [Ethernet Ports State - Configuration] rs232
@@ Line 430: / Line 430: @@
 **Lease Time (//mins.//)**: the DHCP lease time, in minutes. (Default: 1440). \\ \\
-**Automatic IP**: lets FreshTomato obtain a LAN IP via DHCP.  \\  Since release 2022.6, this option is supported in: \\   \\   \\
+**Automatic IP**: lets FreshTomato obtain a LAN IP via DHCP.  \\  Since r2022.6, this option is supported in: \\   \\   \\
   - AP Mode
@@ Line 440: / Line 440: @@
 ===== Ethernet Ports State - Configuration =====
-Settings here are for the Ethernet Ports State graphic in the [[status-overview|Overview]] menu. Link status, Link speed and Diagnostic information are shown for each port, .
+Settings here are for the Ethernet Ports State graphic in the [[status-overview|Overview]] menu. Link status, Link speed and Diagnostic information are shown for each port.
  \\
@@ Line 450: / Line 450: @@
 **Enable Ports State:** enables the Ethernet Ports State graphic. (Default: On). \\ \\
-**Show Speed Info:** checking this displays the link speed of each port, (1GB/100MB/10MB).
+**Show Speed Info:** checking this displays the link speed of each port, (1Gbps/100Mbps/10Mbps).
 (Default: On). \\ \\
-**Invert ports order:** displays port icons in the opposite order from where they are on the hardware.
+**Invert ports order:**  Reverses physical LAN ports display (LAN port1-to-LAN port4 or reverse).  Overview Ethernet labels stay static: WAN0 always leftmost, followed by defined physical LAN order (straight or inverted).
-This is useful when the order of display icons doesn't match the physical locations on the router. (Default: Off).
 ===== Wireless Band Steering =====

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools