Differences

This shows you the differences between two versions of the page.

--- advanced-vlan [2025/03/29 17:27] – [VLAN Wireless] -Replace screenshot with: "advanced-vlan-telekom example.png" @ 852 hogwild
+++ advanced-vlan [2025/11/18 05:53] (current) – [VLAN Notes and Troubleshooting] -Change to: "r2021.8" hogwild
@@ Line 9: / Line 9: @@
  \\
-For VLANs to work properly on ARM and MIPS routers, please use release 2021.8 or later. (See examples.)
+For VLANs to work properly on ARM and MIPS routers, please use r2021.8 or later. (See examples.)
@@ Line 26: / Line 26: @@
 This section contains the assignments of wireless interfaces to various LAN bridges.
-You should check/verify the correct settings on the [[:virtual_wireless|Virtual Wireless]] and [[:basic-network|Network]] menus to ensure proper VLAN operation.
+Always check/verify the correct settings on the [[:virtual_wireless|Virtual Wireless]] and [[:basic-network|Network]] menus to ensure proper VLAN operation.
 The following settings are also mandatory:
@@ Line 43: / Line 43: @@
 GT supports a dual-stack setup (IPv4 & IPv6). For the WAN Port, a VLAN tag with a value of 7 (VID 7) is required.
-{{::advanced-vlan-telekom_example.png?852}}
+{{::advanced-vlan-telekom_example.png?800}}
 ===== VLAN Notes and Troubleshooting =====
-As mentioned earlier, for VLANs to function properly, please** use FreshTomato 2021.8 or later**. Older versions like AdvancedTomato, Shibby, or Toastman, may not work as expected. \\   \\
+As mentioned earlier, for VLANs to function properly, please** use FreshTomato r2021.8 or later**. Older versions like AdvancedTomato, Shibby, or Toastman, may not work as expected. \\   \\
-**PPPoE Connections with FreshTomato 2021.7 and older**
+**PPPoE Connections with FreshTomato r2021.7 and older**
 PPPoE connections work only when the following workaround is implemented:
- \\ **//Example 1//:** FreshTomato 2021.7 is being used to connect to German Telekom ISP. \\ German Telekom uses PPPoE with VID: "7".\\  => you must use VLAN: "7" using VID: "7"  (a "traditional" VLAN/VID mapping).
+ \\ **//Example 1//:** FreshTomato r2021.7 is being used to connect to German Telekom ISP. \\ German Telekom uses PPPoE with VID: "7".\\  => you must use VLAN: "7" using VID: "7"  (a "traditional" VLAN/VID mapping).
- \\  \\ **//Example 2//:** FreshTomato 2021.7 is being used to connect to Freedom Internet. \\ Freedom uses PPPoE , and VLAN: "6" using VID: "6"
+ \\  \\ **//Example 2//:** FreshTomato r2021.7 is being used to connect to Freedom Internet. \\ Freedom uses PPPoE , and VLAN: "6" using VID: "6"
 See:  [[https://www.linksysinfo.org/index.php?threads/fork-freshtomato-arm-development-discussion-only-for-support-always-open-your-own-thread.74117/page-245#post-330148|FreshTomato-ARM - development discussion only - Freedom.nl PPPoE]]
@@ Line 62: / Line 62: @@
  \\
-**//Example 3//:** FreshTomato FT 2021.7 is being used to connect to Vivo FTTH (Brazil).\\ Vivo use PPPoE, and VLAN: "10" using VID: "10"
+**//Example 3//:** FreshTomato r2021.7 is being used to connect to Vivo FTTH (Brazil).\\ Vivo use PPPoE, and VLAN: "10" using VID: "10"
 See [[https://www.linksysinfo.org/index.php?threads/fresh-tomato-r7000-vlan-issue-on-ftth-provider.76958/#post-330955|Tomato Forums: R7000 - VLAN issue on FTTH provider]]
-Since release 2021.8, you can select/use any VLAN from 0 to 15. (See example in above picture for 1 (Telekom ISP), now using VLAN 5 with VID 7)
+Since r2021.8, you can select/use any VLAN from 0 to 15. (See example in above picture for 1 (Telekom ISP), now using VLAN 5 with VID 7)
  \\
+ \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools