Differences

This shows you the differences between two versions of the page.

--- advanced-access [2026/01/08 22:58] – [LAN Access Notes and Troubleshooting] -Add LFs between bulleted paragraphs hogwild
+++ advanced-access [2026/01/08 23:03] (current) – [LAN Access Notes and Troubleshooting] hogwild
@@ Line 40: / Line 40: @@
 ===== LAN Access Notes and Troubleshooting =====
-  * Before r2025.5, regardless of LAN Access rules, a LANx device was able to reach (e.g. ping) all the router's LAN interfaces (only).
+  * On releases r2025.4 and earlier, regardless of LAN Access rules, a LANx device was able to reach (e.g. ping) all the router's LAN interfaces (only).
-  * r2025.5 and later: FreshTomato LAN interfaces can only be reached from within the same subnet. Thus, a device at 192.168.10.10 can only reach the router at its address on the same subnet e.g. 192.168.10.1.
+  * On r2025.5 and later: FreshTomato LAN interfaces can only be reached from within the same subnet. Thus, a device at 192.168.10.10 can only reach the router at its address on the same subnet e.g. 192.168.10.1.
-  * All entries in LAN Access are one-way only. If you want hosts on LAN0 to communicate with hosts on LAN1, and vice versa, you'll need two entries in the table to achieve that.
+  * All entries in this menu are one-way only. If you want hosts on LAN0 to communicate with hosts on LAN1, and vice versa, you'll need two entries in the table for that.
-  * LAN Access is an IP-level access control. Therefore, **all ports/protocols are automatically enabled**. If additional fine tuning is needed (for example, you want to allow only allow port 80/TCP) you'll need to manually configure settings for that.
+  * LAN Access is an IP-level access control. Therefore, **all ports/protocols are automatically enabled**. If additional fine tuning is needed (for example, to allow only allow port 80/TCP) you'll need to manually configure the settings for that.
  \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools